S167MCHZ Starrett Radius Gage Set, .5-7mm, 8-15mm , 22 leaves

1/64-1/2", decimal sizes .010-.500" and in
millimeters from 0.5-15mm.
Many different sets for maximum
convenience. Each set is furnished in an
attractive case, providing complete protection
and easy, instant selection of the right gage
size for the job.

Gage Features

• Made of satin finish stainless steel – rust
  and stain resistant
• Each gage is clearly marked with its
  radius
• Each gage has five different gaging
  surfaces for both convex and concave
  radii
• All gages have precision finished radii
  with extra smooth, accurate edges
• Gage Holder Features
• Any gage can be used with the Starrett
  110 holder which is especially useful for
  checking radii in confined or hard-to-
  reach locations
• Two slots are provided in the holder
  permitting gages to be held at 30º or 45º,
  either square in the slot or tipped to one
  side
• The holder is 4" (100mm) long, providing
  good reach and balance

S167 Radius Gage Sets – Inch
Catalog No.	Radii Range	Increments	Gages	Description
S167AZ	1/32-17/64"	64ths	16	Without Holder
S167AHZ	1/64-17/64"	64ths	17	With Holder
S167BZ	9/32-1/2"	32nds	8	Without Holder
S167CZ	1/32-17/64" 9/32-1/2"	64ths 32nds	24	Sets 167A and S167B Combined, Without Holder
S167CHZ	1/64-17/64" 9/32-1/2"	64ths 32nds	25	Sets 167AH and S167B Combined, With Holder
S167DZ	1/32-1/2"	32nds	16	Without Holder
S167M Radius Gage Sets – Millimeter
S167MAZ	1-7mm	0.5mm	13	Without Holder
S167MAHZ	0.5-7mm	0.5mm	14	With Holder
S167MBZ	8-15mm	1mm	8	Without Holder
S167MCZ	1-7mm 8-15mm	0.5mm 1mm	21	Sets S167MA and S167MB Combined, Without Holder
S167MCHZ	0.5-7mm 8-15mm	0.5mm 1mm	22	Sets 167MB and S167MAH Combined, With Holder
S167MDZ	1-15mm	1mm	15	Without Holder
SD167 Radius Gage Sets – Decimal-Inch
SD167FZ	.020-.300	.020	19	Without Holder
SD167FHZ	.350-.500	.050	19	With Holder
SD167GZ	.010-.025 .030-.100	.005 .010	26	Without Holder
SD167GHZ	.120-.300 .350-.500	.020 .050	26	With Holder
110	Holder Only