3753A-12/300 Starrett Electronic Depth Gage without Output 0-12*(0-300mm) Range

3753A-12/300
Starrett Electronic Depth Gages
0-12" / 0-300mm

The Starrett 3753 Series is light and easy to
use for depth measurements within its range.

Readability Features

• Clear, easily-read numbers, properly sized for the tool

Design Features for Accuracy and Long
Life

• Linear accuracy: ±.001" (±0.03mm)
• Resolution: .0005" (0.01mm)
• Exclusive Starrett designed microprocessor chip
• Hardened stainless steel body and slide for long life
• Fine adjustment thumb roll for precision measurements
• Lock to hold the slide in position
• Hardened base is standard 2-3/4"
• (70mm) long, but optional base extensions of 7" and 12" (175 and
  300mm) are available
• A hook attachment is furnished with the gage, making it possible to take readings from the edge of a workpiece to edges of slots, grooves, shoulders, and other I.D. length dimensioning. The removable hook has the screw permanently attached to
  prevent loss

• One-year minimum battery life with furnished 3-volt battery, CR2032

Action Features with Five Control Buttons

• Inch/millimeter conversion
• Zero at any position
• Hold readout at any position
• Manual ON/OFF plus a built in automatic OFF after 15 minutes of nonuse
• LIMITS button allows high and low limits to be set. Out-of-imits readings will show a flashing display