237M Starrett Rule Depth Gage, 0-150mm Range, mm / 1/2mm*

237M
Starrett Steel Rule Depth Gages
0-150mm

These very handy depth gages can be used
to quickly obtain measurements in 64th of an
inch or 1/2mm by simply adjusting the rule to
the required depth.

•The gage consists of a nicely ?nished,
hardened steel head and an accurate,
machine divided, tempered steel rule.
These rules are either our 610N (6 inch)
or our 635N (150mm) models

•Gage can be smoothly adjusted to the
required measurement and then locked
into position by a knurled nut

•Base is cut out on one side, adjacent to
the rule, permitting easier readings and
more accurate measurements

• 6" hook rule (236HC, EDP 51077) also
available, permitting easier readings from
the edge of a workpiece to the edges of
slots, shoulders, etc. Graduated in 32nds,
64ths